Mold could be a big problem for people who are sensitive to it and make them sick. This is something that most people already know. But did you know that mold can also grow in your HVAC system (heating, ventilation, and air conditioning)? If you haven’t, read this article on my website. In this section, we’ll talk about some of the best ways to keep mold from growing in your home’s HVAC system, so you’ll never have to worry about it again.
Do you need service for your New HVAC system? Union City HVAC and Heating can be reached.
Unclog Your Drain Tubes
One of the most common ways for mold to grow in your heating, ventilation, and air conditioning system is for its drain tubes to get clogged. If there is a condensate drain tube, it needs to be connected to some kind of drainage or catch bucket so that water doesn’t build up and cause a problem. Mold might grow in places like this because there is moisture there.
Check Airy Places
Mold can also usually get into your HVAC system and cause problems if it can get in from somewhere other than the drain tubes. In this case, you’ll need to look for any places where air could get in. You might have a return air duct or grills on the outside of your home, which are ways for unconditioned air to get in. If this happens, mold will have a chance to grow inside your HVAC system, which can cause you a number of problems.
Insulate Your Duct
If your ducts go through areas that aren’t kept at a certain temperature, it makes sense that they might hold on to moisture and let mold grow in your HVAC system. This can be avoided if your ductwork is well insulated. Because of this, you need to make sure that any ducts that go through areas that aren’t air-conditioned are insulated so that they don’t keep water in them, which could make a good place for mold to grow.
Drain Unit Properly
If you have a condensate drain or another type of tube that is supposed to move water away from your unit, it needs to be draining properly so that moisture doesn’t build up and cause mold to grow in your HVAC system. This can be done by making sure there is enough drainage.
Clean Air Filter
The air filter getting clogged is another common problem that can happen with your heating, ventilation, and air conditioning system. Air filters are meant to keep dirt, dust, and other particles from getting into your unit. Because of this, it’s important that air filters don’t get clogged. If they do, mold could grow in the damp environment that’s created when airflow is cut off.
Ensure Enough Ventilation
If you have a furnace or an air conditioner, it goes without saying that you also have some kind of venting system that lets the conditioned airflow through your house. If this is not put in correctly or if it is blocked in any way, there is a chance that mold will grow on the inside because there will be no way for moisture to get out.
How to Deal With Mold Growth
If you find mold growing in your air conditioner or HVAC system as a whole, you need to take a few steps to get rid of it completely. The first thing that needs to be done is to talk to an air quality expert who can make sure that all of the places affected by this problem are fixed in the right way so that they don’t cause problems in the future. Next, make sure your HVAC system is thoroughly cleaned. The mold may have grown over time, so you’ll want to make sure it’s all gone before it starts to grow back.
Signs Your AC Needs Repairs
At this point in the summer, you’ve been using your air conditioner for a while, but you still need it to work well for a long time. This means keeping an eye out for signs that something is wrong and calling for air conditioning repair in Union City as soon as you notice something is wrong. Obviously, not everyone knows how to tell when an air conditioner needs to be serviced. So, I’ll give you a list of seven things to watch out for.
Warm Air is Coming Out
If warm air is coming out of your vents even though the air conditioner is on, check the thermostat first. If the settings are correct, the problem is probably with the air conditioner or another part of the heating, ventilation, and air conditioning system.
Poor Air Flow
Try putting your palm over a vent to feel how strong the air is there. If it seems weaker than you remember it being, the problem could be with the motor or the filter. No matter what, you need to have the AC fixed.
Rapid Cycling
When it’s really hot outside, your air conditioner needs to start and stop more often. If, on the other hand, you notice that the cycle happens too quickly for the outside temperature, this could mean that your air conditioner needs some basic maintenance.
Too High Level of Moisture
Even though Union City may be humid, you shouldn’t let that humidity into your home. The humidity should be kept in check by your air conditioner. If it’s not, it could mean that you need a new air conditioner.
Leaks
Condensation is a natural result of how all air conditioning equipment works. Still, this shouldn’t come into our house. If it happens, it means that the air conditioner isn’t working right, and the moisture in the air is bad for your health.
Foul Odor
Having a bad smell coming from your vents means that something is wrong. There’s a chance this has something to do with your air conditioner. But the smell could also come from a number of different things. In any case, you will want a Union City HVAC and Heating service to take care of the problem for you.
Do you need help keeping mold from getting into your HVAC system? Get in touch with Union City HVAC and Heating, and we will start working right away to make your home safer.